Brentwood Outdoor Room

Celeste·Projects·Outdoor

Brentwood Outdoor Room

Brentwood, Los Angeles

Type

Outdoor

Location

Brentwood, Los Angeles

Duration

14 days

Year

2024

Overview

The project.

Design and construction of a 680 sq ft attached outdoor room — structural pergola, shade sail system, and architectural lighting — extending the home's living space into the rear yard. Permitted and engineered for Santa Ana wind loads.

Objectives

Create a shaded outdoor living space usable year-round.

Design a structure architecturally consistent with the home's contemporary character.

Engineer and permit the structure for Santa Ana wind loads.

Remove existing unpermitted trellis and remediate attachment point.

Before / After

Brentwood Outdoor Room — after
Brentwood Outdoor Room — before
Before
After

Drag the handle to compare before and after.

Condition Assessment

Condition at assessment.

The rear yard was an underutilized concrete patio with no shade, no weather protection, and no architectural connection to the home. The homeowner reported the space as unusable from May through October due to afternoon sun exposure. An existing wood trellis — unpermitted and structurally inadequate — was present along the west wall.

No shade or weather protection

High

Unshaded south and west exposure — space unusable during peak afternoon hours.

Unpermitted trellis

Medium

Existing wood trellis along west wall — unpermitted, structurally inadequate, and not attached to the home.

No architectural connection

Medium

Patio had no visual or material connection to the home's architecture.

Design Decisions

Why we did what we did.

Structural steel posts, wood beam aesthetic.

The pergola uses steel post bases and concealed structural connections — engineered for Santa Ana wind loads — with exposed Douglas fir beams that provide the warm, architectural character the homeowner wanted. The steel is hidden; the wood reads.

Shade sail system for adjustable coverage.

Rather than a solid roof — which would have required a more complex permit and reduced the outdoor character — we designed a shade sail system on a track that allows the homeowner to adjust coverage seasonally. Full shade in summer, open sky in winter.

Architectural lighting integrated into the structure.

Recessed LED fixtures were integrated into the beam structure during construction — not added after. This avoids exposed conduit and surface-mounted fixtures that would compromise the architectural quality of the space.

Products Specified

What we used.

Structure

Douglas Fir Timber Frame

Engineered connections · Steel post bases · Concealed hardware

Shade System

Commercial-Grade Shade Sail

UV-stabilized HDPE fabric · Track-mounted · Adjustable coverage

Lighting

Recessed LED — Outdoor Rated

IP65 rated · Integrated into beam structure · Warm white 2700K

Foundation

Concrete Pier Footings

Engineered for wind uplift · Below frost depth · Inspected by city

Construction Documentation

In progress.

Pergola structure during beam installation.
Pergola structure during beam installation.

Timeline

How it unfolded.

Days 1–2

Demolition & Site Prep

Removal of existing unpermitted trellis. Concrete saw-cutting for pier footing locations.

Days 3–4

Footing Excavation & Pour

Pier footing excavation and concrete pour. City inspection of footings prior to backfill.

Days 5–8

Post & Beam Installation

Steel post base installation. Douglas fir post and beam erection. Structural connections and hardware.

Days 9–11

Electrical & Lighting

Conduit installation within beam structure. Recessed fixture installation. Electrical rough-in inspection.

Days 12–14

Shade System & Completion

Shade sail track installation. Sail installation and adjustment. Final inspection and documentation.

Ready to start?

Tell us about your home.